ES601-US OPERATING MANUALES601pc-US Software/Chapter 8 # Page 176Figure 127 - Physical Inspections selector menu.8.10 Inspections and User TestersPhysical Inspections and User Tester AutoSequences are Checklists which are intended for use in specificapplications. A "Physical Inspection" is a list of inspection checkpoints, typically visual inspection checks,targeted at a general class of equipment, for example, patient monitor, defibrillator, infusion pump and soon. A "Tester AutoSequence" is a program which is intended to control and acquire measurement datafrom a specific test instrument which connects to the ES601-US analyzer via a TESTER PORT.Inspections and Tester AutoSequences are limited in length to 24 steps, and either or both can be "called"from a Checklist by means of theA Checkitem. More information can be found in theAutomated TestingPrinciples section of Chapter 6.Pressing Inspections and User Tester on the main window of ES601pc-US will display theInspections and User Testers window. By default, the Physical Inspections tab is selected. One example or"starter" Inspection is included with ES601pc-US, and following installation of the software this examplewill be evident as the first Inspection as shown below, leaving 17 blank or "unused" Inspections forprogramming as desired by the user.
