Daikin EKHHP300AA2V3 Installation And Operating Instructions Manual

Also see for EKHHP300AA2V3: Installation and maintenance manual

6 x DecommissioningDAIKIN EKHHP(3/5)00AA2V3DAIKIN Hot water heat pump008.1423444_05 – 08/2016Installation and operating instructions21● Decommissioning a DAIKIN EKHHP (see section 6.1).● Disconnect the DAIKIN EKHHP from all electrical connec-tions, refrigerant and water connections.● Dismantle the DAIKIN EKHHP or components in accordancewith the installation guide in reverse order.● DAIKIN EKHHP disposed off in a professional manner.Recommendations for disposalThe DAIKIN EKHHP has an environmentally friendly design.During the disposal process, the only waste created is that whichcan be used for material or thermal recycling. The materials usedthat are suitable for recycling can be sorted into individual types.CAUTION!Coolant escaping from the system causes long-term damage to the environment.Mixing different kinds of coolant can result inhazardous toxic gases being released. Mixingwith oils when coolant escapes can lead to thesoil being contaminated.● Never allow coolant to be released into theatmosphere - always suction it off and recycleusing a suitable recycling device.● Always recycle coolant, in so doing keeping itseparated from oils and other additives.● Only store different types of coolantseparately, in suitable pressure vessels.● Dispose of coolants, oils and additivesproperly and in accordance with the appli-cable national regulations of the country it isbeing used in.DAIKIN has complied with the standards for environ-mentally-friendly disposal as a result of the environ-mentally-friendly design of the DAIKINEKHHP. Properdisposal in compliance with the respective national reg-ulations of the country of use is the responsibility of theuser/owner.The designation of the product means that electricaland electronic products may not be disposed oftogether with unsorted domestic waste.Proper disposal in compliance with the respectivenational regulations of the country of use is the respon-sibility of the user/owner.– Disassembly of the system, handling of coolant, oil and otherparts may only be carried out by a qualified fitter.– Disposal may only be carried out by an organization thatspecialises in reuse, recycling and recovery.Further information is available from the installation company orthe responsible local authorities.