Danfoss FC 300 Design Manual

Also see for FC 300: Operating instructions Instruction manual Design guide Design guide Design guide

Contents

Danfoss FC 300 Design Manual Manual pdf 72 page image

FC 300 Design GuideFC 300 Selection" Options and AccessoriesDanfoss offers a wide range of options and accessories for VLT AutomationDrive FC 300 Series." Mounting Option Modules in Slot BThe power to the adjustable frequency drive must be disconnected.ï Remove the LCP (Local Control Panel), the terminal cover, and the LCP framefrom the adjustable frequency drive.ï Insert the MCB10x option card into slot B.ï Connect the control cables and fasten the cables with the enclosed cable strips.* Remove the knock out in the extended LCP frame, so that the option will fit under the extended LCP frame.ï Fit the extended LCP frame and terminal cover.ï Fit the LCP or blind cover in the extended LCP frame.ï Connect power to the adjustable frequency drive.ï Set up the input/output functions in the corresponding parameters, as mentionedin the section General Technical Data.0.34 - 10 HP [0.25 - 7.5 kW] IP 20 0.34 - 10 HP [0.25 - 7.5 kW] IP 55and14.75 - 29.5 HP [11 - 22 kW] IP 2172 MG.33.B6.22 - VLT is a registered Danfoss trademark