Danfoss VLT AQUA Drive FC 202 Operating Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

4 Mechanical Installation4.1 Items SuppliedItems supplied can vary according to product configu-ration.• Make sure the items supplied and the informationon the nameplate correspond to the order confir-mation. Illustration 4.1 and Illustration 4.2 showsample nameplates for a D-sized drive either withor without an options cabinet.• Check the packaging and the drive visually fordamage caused by inappropriate handling duringshipment. File any claim for damage with thecarrier. Retain damaged parts for clarification.OUT: 3x0-Vin 0-590Hz 177/160 AIN: 3x380-480V 50/60Hz 171/154 A90 kW / 125 HP, High OverloadVLTT/C: FC-202N110T4E20H2TGC7XXSXXXXAQBXCXXXXD0P/N: 136G7653 S/N: 123456H123R AQUA Drivewww.danfoss.come30bg627.10ASSEMBLED IN USAMax Tamb. 55° C/131° F w/ Output Current DeratingCHASSIS / IP20 Tamb. 40° C/104° FSCCR 100 kA at UL Voltage range 380-480 VListed 36U0 E70524 IND. CONT. EQ.UL Voltage range 380-480 VCAUTION - ATTENTION:Stored charge, wait 20 min.Charge residuelle, attendez 20 min.See manual for special condition / mains fuseVoir manuel de conditions speciales / fusiblesWARNING - AVERTISSEMENT:``123456Danfoss A/S6430 NordborgDenmark089OUT: 3x0-Vin 0-590Hz 212/190 AIN: 3x380-480V 50/60Hz 204/183 A110kW / 150 HP, Normal Overload1 Type code2 Part number and serial number3 Power rating4 Input voltage, frequency, and current5 Output voltage, frequency, and current6 Discharge timeIllustration 4.1 Example Nameplate for Drive Only (D1h–D4h)OUT: 3x0-Vin 0-590Hz 315/302 AIN: 3x380-480V 50/60Hz 304/291 A160 kW / 250 HP, High OverloadVLTT/C: FC-202N200T4E5MH2XJC3XXSXXXXAXBXCXXXXDXP/N: 136G7973 S/N: 123456H123R AQUA Drivewww.danfoss.come30bg628.10ASSEMBLED IN USAMax Tamb. 55 ° C/131° F w/ Output Current DeratingType 12 / IP54 Tamb. 40° C/104° FSCCR 100 kA at UL Voltage range 380-480 VListed 36U0 E70524 IND. CONT. EQ.UL Voltage range 380-480 VCAUTION - ATTENTION:Stored charge, wait 20 min.Charge residuelle, attendez 20 min.See manual for special condition / mains fuseVoir manuel de conditions speciales / fusiblesWARNING - AVERTISSEMENT:``123456Danfoss A/S6430 NordborgDenmarkUse the following Typecode to order Drive-only replacement:T/C: FC-202N200T4E5MH2XJC7XXSXXXXAXBXCXXXXDXOUT: 3x0-Vin 0-590Hz 395/361 AIN: 3x380-480V 50/60Hz 381/348 A200 kW / 300 HP, Normal Overload1 Type code2 Part number and serial number3 Power rating4 Input voltage, frequency, and current5 Output voltage, frequency, and current6 Discharge timeIllustration 4.2 Example Nameplate for Drive with OptionsCabinet (D5h-D8h)NOTICELOSS OF WARRANTYDo not remove the nameplate from the drive. Removingthe nameplate can result in loss of warranty.Mechanical Installation VLT® AQUA Drive FC 20216 Danfoss A/S © 09/2018 All rights reserved. MG21A50244