3 Product Overview3.1 Intended UseThe drive is an electronic motor controller that converts AC mains input into a variable AC waveform output. The frequencyand voltage of the output are regulated to control the motor speed or torque. The drive is designed to:• Regulate motor speed in response to system feedback or to remote commands from external controllers.• Monitor system and motor status.• Provide motor overload protection.The drive is designed for industrial and commercial environments in accordance with local laws and standards. Dependingon configuration, the drive can be used in standalone applications or form part of a larger system or installation.NOTICEIn a residential environment, this product can cause radio interference, in which case supplementary mitigationmeasures can be required.Foreseeable misuseDo not use the drive in applications which are non-compliant with specified operating conditions and environments. Ensurecompliance with the conditions specified in chapter 10 Specifications.3.2 Power Ratings, Weight, and DimensionsFor enclosure sizes and power ratings of the drives, refer to Table 3.1. For more dimensions, see chapter 10.9 EnclosureDimensions.Enclosure size D1h D2h D3h D4h D3h D4hRated power [kW]55–75 kW(200–240 V)110–160 kW(380–480 V)75–160 kW(525–690 V)90–160 kW(200–240 V)200–315 kW(380–480 V)200–400 kW(525–690 V)55–75 kW(200–240 V)110–160 kW(380–480 V)75–160 kW(525–690 V)90–160 kW(200–240 V)200–315 kW(380–480 V)200–400 kW(525–690 V)With regeneration or load shareterminals1)IPNEMA21/54Type 1/1221/54Type 1/1220Chassis20Chassis20Chassis20ChassisShippingdimensions[mm (inch)]Height 587 (23) 587 (23) 587 (23) 587 (23) 587 (23) 587 (23)Width 997 (39) 1170 (46) 997 (39) 1170 (46) 1230 (48) 1430 (56)Depth 460 (18) 535 (21) 460 (18) 535 (21) 460 (18) 535 (21)Drivedimensions[mm (inch)]Height 893 (35) 1099 (43) 909 (36) 1122 (44) 1004 (40) 1268 (50)Width 325 (13) 420 (17) 250 (10) 350 (14) 250 (10) 350 (14)Depth 378 (15) 378 (15) 375 (15) 375 (15) 375 (15) 375 (15)Maximum weight [kg (lb)] 98 (216) 164 (362) 98 (216) 164 (362) 108 (238) 179 (395)Table 3.1 Power Ratings, Weight, and Dimensions, Enclosure Size D1h–D4h1) Regen, load share, and brake terminal options are not available for 200–240 V drives.Product Overview Operating GuideMG21A502 Danfoss A/S © 09/2018 All rights reserved. 73 3