UMN:CLI User ManualV5808104no cpu statistics-limit all{PORTS | all}Disables the switch to generate a syslog messageaccording to the number of the packets handled byCPU for all packet types.To display a configured value to generate a syslog message according to the number ofthe packets handled by CPU, use the following command.Command Mode Descriptionshow cpu statistics-limitEnableGlobalBridgeShows a configured value to generate a syslogmessage according to the number of the packetshandled by CPU.5.1.10.3 Protocol StatisticsTo enables/disables the system to collect the statistics of the protocols, use the followingcommand.Command Mode Descriptionprotocol statistics {enable |disable} [arp | icmp | ip | tcp |udp]GlobalBridgeEnables/disables the system to collect the statistics ofthe protocols. (ARP, ICMP, IP, TCP, UDP)To display the statistics of the protocol, use the following command.Command Mode Descriptionshow protocol statistics avg-pkt[PORTS] EnableGlobalBridgeShows the statistics of the protocol for averagepackets.show protocol statistics total[PORTS]Shows the traffic statistics of the protocol for totalpackets.To delete the collected statistics of the protocol, use the following command.Command Mode Descriptionclear protocol statistics [PORTS] GlobalBridge Deletes the collected statistics of the protocol.5.1.11 Port InformationTo display the port information, use the following command.Command Mode Descriptionshow port [PORTS]EnableGlobalBridgeShows a current port status, enter a port number.PORTS: port numbershow port status [PORTS]show port description [PORTS] Shows a specified port description, enter a portnumber.show port module-info [PORTS] Shows the information of SFP module (including
