User Manual UMN:CLIV580859INIT: Entering runlevel: 3INIT: Start UPSWITCH login: adminPassword:SWITCH>The password of “admin” is restored to the factory default password (no password) if theoperator has not created any user accounts.4.1.5 Management for System Account4.1.5.1 Creating System AccountFor the V5808, the administrator can create a system account. In addition, it is possible toset the security level from 0 to 15 to enhance the system security.To create a system account, use the following command.Command Mode Descriptionuser add NAME DESCRIPTIONGlobalCreates a system account.user add NAME level <0-15>DESCRIPTION Creates a system account with a security level.The account of level 0 to level 14 without any configuring authority only can use exit andhelp in Privileged EXEC View mode and cannot access to Privileged EXEC Enable mode.The account with the highest level 15 has a read-write authority.To delete the created account, use the following command.Command Mode Descriptionuser del NAME Global Delete the created account.To display a created account, use the following command.Command Mode Descriptionshow user Enable/Global/Bridge Shows a created account.4.1.5.2 Security LevelFor the V5808, it is possible to configure the security level from 0 to 15 for a systemaccount. The level 15, as the highest level, has a read-write authority. The administratorcan configure from level 0 to level 14. The administrator decides which level user useswhich commands in which level. As the basic right from level 0 to level 14, it is possible touse exit and help command in Privileged EXEC View mode and it is not possible toii
