User Manual UMN:CLIV5808599must share the MD5 key to decrypt the message andencrypt the response.ip rip authentication stringSTRING InterfaceConfigures RIP authentication string which will beusing on interface without Key chain. The string mustbe shorter than 16 characters.STRING: RIP authentication stringTo disable RIP authentication, use the following command.Command Mode Descriptionno ip rip authentication key-chain NAMEInterfaceDisables authentication keys that can be used on aninterface.no ip rip authentication mode{text | md5} Disables specified authentication mode.no ip rip authentication stringSTRINGRemoves RIP authentication string which will be usingon interface without Key chain.11.4.14 Restarting RIPOccasionally, you should restart RIP system only when the switch is still operating whileyou manage and configure RIP. At this time, the switch reports the neighbors that RIPsystem is being restarting. It keeps previous route information until the restarting iscomplete in timer.To restart RIP system only, use the following command.Command Mode Descriptionrip restart grace-period<1-65535>GlobalRestarts RIP system and set the period.no rip restart grace-period[<1-65535>] Removes a configured period.11.4.15 UDP Buffer Size of RIPRIP protocol exchanges the routing information between routers using UDP packets. TheV5808 can be configured theses UDP packets buffer size, use the following command.Command Mode Descriptionrecv-buffer size <8196-2147483647>RouterSets the UDP Buffer size value for using RIP.8196-2147483647: UDP buffer size valueno recv-buffer size <8196-2147483647> Restore the default value of UDP buffer size.11.4.16 Monitoring and Managing RIPYou can display specific router information such as the contents of IP routing tables, and
