User Manual UMN:CLIV5808153To enable/disable the alarm notify activity, use the following command.Command Mode Descriptionsnmp notify-activity {enable |disable} Global Enables/disables the alarm notify activity.(default: disable)7.1.13.2 Alarm Severity CriterionYou can set an alarm severity criterion to make an alarm be shown only in case ofselected severity or higher. For example, if an alarm severity criterion has been set tomajor, you will see only an alarm whose severity is major or critical.To set an alarm severity criterion, use the following command.Command Mode Descriptionsnmp alarm-severity criteria{critical | major | minor | warning| intermediate}Global Sets an alarm severity criterion.(default: warning)The order of alarm severity is critical > major > minor > warning > intermediate.7.1.13.3 Default Alarm SeverityTo set default alarm severity, use the following command.Command Mode Descriptionsnmp alarm-severity default{critical | major | minor | warning| intermediate}Global Sets default alarm severity.(default: minor)7.1.13.4 Generic Alarm SeverityTo set generic alarm severity, use the following command.Command Mode Descriptionsnmp alarm-severity admin-access-login {critical| major | minor | warning | intermediate}GlobalSets severity of an alarm for admin-access-login.snmp alarm-severity auth-fail {critical | major |minor | warning | intermediate} Sets severity of an alarm for auth-fail.snmp alarm-severity cli-history {critical | major |minor | warning | intermediate} Sets severity of cli history log.snmp alarm-severity cold-start {critical | major |minor | warning | intermediate}Sets severity of an alarm for systemcold restart.snmp alarm-severity cpu-load-over {critical |major | minor | warning | intermediate}Sets severity of an alarm for CPU loadhigh.snmp alarm-severity dhcp-lease {critical | major | Sets severity of an alarm for no more IPi
