UMN:CLI User ManualV5808124{os1 | os2} of os1 or os2.copy {ftp | tftp} bootloaderdownloadDownloads a bootloader image file from FTP or TFTPserver.To access FTP to back up the configuration or use the backup file, you should know FTPuser ID and the password. To back up the configuration or use the file through FTP, youcan recognize the file transmission because hash function is automatically turned on.To delete a system configuration file, use the following command.Command Mode Descriptionerase config FILENAME EnableGlobalDeletes a specified configuration file.FILENAME: configuration file nameerase key FILENAME Enable Deletes a specified SSH key file.FILENAME: SSH key file nameTo display a system configuration file, use the following command.Command Mode Descriptionshow startup-config EnableGlobalBridgeShows a current startup configuration.show config-list Shows a list of configuration files.The following is an example of displaying a list of configuration files.SWITCH(config)# copy running-config V5808SWITCH(config)# show config-list=========================CONFIG-LIST=========================l3_defaultV5808SWITCH(config)#6.2.5 Restoring Default ConfigurationTo restore a default configuration of the system, use the following command.Command Mode Descriptionrestore factory-defaultsEnableRestores a factory default configuration.restore layer2-defaults Restores an L2 default configuration.restore layer3-defaults Restores an L3 default configuration.After restoring a default configuration, you need to restart the system to initiate.ii
