Using the System Setup Program 4-9PS/2 MouseSetting PS/2 MOUSE to ENABLED (the default) allows aninstalled PS/2 mouse to function. Disabling PS/2 MOUSEfrees interrupt request (IRQ) 12, but also prevents anyinstalled PS/2 mouse from functioning.Security Menu CategoriesTo access the Security menu (see Figure 4-4), use thearrow keys to highlight Security. This sectionexplains in detail the System Setup categories in theSecurity menu.Figure 4-4. Security Menu of the System Setup ProgramSupervisor Password IsThis category displays whether the supervisor passwordis disabled or enabled. When ENABLED is displayed, thesupervisor password has already been set and is requiredin order to have full access (see Table 4-2) to the SystemSetup program. The default is DISABLED.User Password IsThis category displays whether the user password is dis-abled or enabled. When ENABLED is displayed, the userpassword has already been set and is required at boot up.Unlike the supervisor password, the user password doesnot allow you full access (see Table 4-2) to the SystemSetup program. The default is DISABLED.configuration options and system data title box helpkey functions<ENTER >
