Paper menuDefault Source menuMenu item DescriptionDefault SourceTray MP FeederEnvelope FeederManual PaperManual EnvSets a default paper source for all print jobsNotes:• Tray 1 (standard tray) is the factory default setting.• Only an installed paper source will appear as a menu setting.• A paper source selected by a print job will override the Default Sourcesetting for the duration of the print job.• If the same size and type of paper are in two trays and the Paper Size andPaper Type settings match, then the trays are automatically linked. Whenone tray is empty, the job prints using the linked tray.• From the Paper menu, Configure MP must be set to Cassette in order forMP Feeder to appear as a menu setting.Paper Size/Type menuMenu item DescriptionTray SizeA4A5A6JIS B5LetterLegalExecutive1Oficio1FolioStatement1UniversalSpecifies the paper size loaded in each trayNotes:• A4 is the international factory default setting. Letter is the US factorydefault setting.• For trays with automatic size sensing, only the size detected by thehardware appears.• Use this menu item to configure automatic tray linking. If the same sizeand type of paper are in two trays and the Paper Size and Paper Typesettings match, then the trays are automatically linked. When one trayis empty, the job prints using the linked tray.• Automatic size sensing is not supported for Oficio, Folio, or Statementpaper sizes.• The 2000-sheet tray supports A4, Letter, and Legal paper sizes.1 Appears only if Tray Size Sensing is turned off.Note: Only installed trays, drawers, and feeders are listed in this menu.Understanding printer menus151
