Menu item DescriptionTray TypePlain PaperCard StockTransparencyRecycledBondLetterheadPreprintedColored PaperLight PaperHeavy PaperRough/Cotton PaperCustom Type Specifies the type of paper loaded in each trayNotes:• Plain Paper is the factory default setting for Tray 1. Custom Type isthe factory default setting for all other trays.• If available, a user-defined name will appear instead of Custom Type .• Use this menu item to configure automatic tray linking. If the same sizeand type of paper are in two trays and the Paper Size and Paper Typesettings match, then the trays are automatically linked. When one trayis empty, the job prints using the linked tray.MP Feeder SizeA4A5A6JIS B5LetterLegalExecutiveOficioFolioStatementUniversal7 3/4 Envelope9 Envelope10 EnvelopeDL EnvelopeOther EnvelopeSpecifies the paper size loaded in the multipurpose feederNotes:• From the Paper menu, Configure MP must be set to Cassette in order forMP Feeder Size to appear as a menu item.• A4 is the international factory default setting. Letter is the US factorydefault setting.• The multipurpose feeder does not automatically sense paper size. Thepaper size value must be set.1 Appears only if Tray Size Sensing is turned off.Note: Only installed trays, drawers, and feeders are listed in this menu.Understanding printer menus152
