Additional printer setupInstalling internal optionsCAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memorydevices sometime after setting up the printer, then turn the printer off, and unplug the power cord from thewall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,and unplug any cables going into the printer.You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in thissection explain how to install the available cards; you can also use them to locate a card for removal.All the listed options may not be available. For more information, contact the place where you purchased the printer.Available internal options• Memory cards– Printer memory– Flash memory– Fonts• Firmware cards– Bar Code and Forms– IPDS and SCS/TNe– PrintCryptionTM– PRESCRIBE• Printer hard disk• Internal Solutions Ports (ISP)– RS-232-C Serial ISP– Parallel 1284-B ISP– MarkNetTM N8150802.11 b/g/n Wireless ISP– MarkNet N8130 10/100 Fiber ISP– MarkNet N8120 10/100/1000 Ethernet ISP• MarkNet N8110 V-34 Fax CardAdditional printer setup24
