Menu item DescriptionPacket BurstYesNoReduces network traffic by allowing the transfer and acknowledgement ofmultiple data packets to and from the NetWare serverNote: Yes is the factory default setting.NSQ/GSQ ModeYesNoSpecifies the NSQ/GSQ Mode settingNote: Yes is the factory default setting.LexLink menuThis menu is available from the Network/Ports menu:Network/Ports ª Standard Network or Network ª Std Network Setup or Net Setup ª LexLink menuMenu item DescriptionActivateOnOffActivates LexLink supportNote: Off is the factory default setting.View Nickname Lets you view the assigned LexLink nicknameNote: The LexLink nickname can be changed only from the Embedded WebServer.Standard USB menuMenu item DescriptionPCL SmartSwitchOnOffSets the printer to automatically switch to PCL emulation when a print job receivedthrough a USB port requires it, regardless of the default printer languageNotes:• On is the factory default setting.• When the Off setting is used, the printer does not examine incoming data.• When the Off setting is used, the printer uses PostScript emulation if the PSSmartSwitch setting is On. It uses the default printer language specified in theSetup menu if the PS SmartSwitch setting is Off.PS SmartSwitchOnOffSets the printer to automatically switch to PS emulation when a print job receivedthrough a USB port requires it, regardless of the default printer languageNotes:• On is the factory default setting.• When the Off setting is used, the printer does not examine incoming data.• When the Off setting is used, the printer uses PCL emulation if the PCLSmartSwitch setting is On. It uses the default printer language specified in theSetup menu if the PCL SmartSwitch setting is Off.Understanding printer menus171
