3 From the printer control panel, press .4 Press until Photo Reprint appears.5 Press the arrow buttons to scroll to Yes, and then press .6 Press the arrow buttons to select the desired paper size, and then press .7 Press .Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. Forbest results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24hours before stacking, displaying, or storing.Enlarging or reducing images1 Load paper.2 Load an original document facedown on the scanner glass.3 From the printer control panel, press .4 Press until Resize appears.5 Press the arrow buttons until the setting that you want appears.Notes:• If you select Custom % Resize, then press , and then press the arrow buttons to select the desired custompercent value. Press to save the setting.• If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to printa borderless copy on the paper size that you selected. For best results with this resize setting, use photopaper and set the paper type to Photo, or let the printer automatically detect the paper type.6 Press .Note: After the copy job is finished, press to reset the settings to the default. The resize setting also switches to100% after two minutes of printer inactivity.Adjusting copy quality1 Load paper.2 Load an original document faceup into the ADF or facedown on the scanner glass.3 From the printer control panel, press .4 Press until Quality appears.5 Press the arrow buttons to set the copy quality to Automatic, Draft, Normal, or Photo, and then press to saveyour setting.6 Press .Copying48
