Installing the printer on a wireless networkBefore you install the printer on a wireless network, make sure that:• Your wireless network is set up and working properly.• The computer you are using is connected to the same wireless network where you want to set up the printer.1 Close all open software programs.2 Insert the installation software CD.If the Welcome screen does not appear after a minute, then launch the CD manually:a Click , or click Start and then click Run.b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.3 Follow the instructions on the Welcome screen to set up the printer.Installing the printer on other computersOnce the printer is set up on the wireless network, it can be accessed wirelessly by any other computer on the network.However, you will need to install the printer driver on every computer that will access it. You do not need to configurethe printer again, although you will need to run the setup software on each computer to install the driver.1 Close all open software programs.2 Insert the installation software CD.If the Welcome screen does not appear after a minute, then launch the CD manually:a Click , or click Start and then click Run.b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.3 Follow the instructions on the computer screen for installing a configured printer on a new computer.Interpreting the colors of the Wi-Fi indicator lightThe colors of the Wi-Fi indicator light show the network status of the printer.• Off means one of the following:– The printer is turned off or is powering up.– The printer is not connected to a wireless network and is in Power Saver mode. In Power Saver mode, thepower light pulses on and off.• Solid orange means one of the following:– The printer has not yet been configured for a wireless network.– The printer is configured for an ad hoc connection, but it is not currently communicating with another ad hocdevice.• Blinking orange means one of the following:– The printer is out of the range of the wireless access point (wireless router).– The printer is trying to communicate with the wireless access point, but the wireless access point is turnedoff or not working properly.– Either the configured printer or the wireless access point has been turned off and back on, and the printer istrying to establish communications with the network.– The wireless settings of the printer may no longer be valid.• Green means that the printer is connected to a wireless network and is ready for use.Networking82
