GUID-BF010F40-C60D-4C8D-B513-51ED0B208EFBRemoving the network daughter cardPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.3. If installed, remove expansion card(s) from the expansion card riser 2.4. Keep the Phillips #1 screwdriver ready.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.Steps1. Loosen the captive screws that secure the network daughter card (NDC) to the system board.2. Hold the NDC by the edges on either side of the touch point and lift the card to remove it from theconnector on the system board.3. Slide the NDC away from the back of the system until the Ethernet connectors are clear of the slot inthe back panel.4. Lift the NDC out of the chassis.125
