You must use the default iDRAC IP address 192.168.0.120 to configure the initial network settings,including setting up DHCP or a static IP for iDRAC.NOTE: To access iDRAC, ensure that you install the iDRAC port card or connect the network cableto the Ethernet connector 1 on the system board.NOTE: Ensure that you change the default user name and password after setting up the iDRAC IPaddress.GUID-630530B1-28EB-4BC1-BFB0-BA34E4EF576BLog in to iDRACYou can log in to iDRAC as:• iDRAC user• Microsoft Active Directory user• Lightweight Directory Access Protocol (LDAP) userThe default user name and password are root and calvin. You can also log in by using Single Sign-Onor Smart Card.NOTE: You must have iDRAC credentials to log in to iDRAC.For more information about logging in to iDRAC and iDRAC licenses, see the Integrated Dell RemoteAccess Controller User's Guide at Dell.com/idracmanuals.GUID-1AB8E7C1-D279-4356-B543-698D5F784858Options to install the operating systemIf the system is shipped without an operating system, install the supported operating system by using oneof the following resources:Table 27. Resources to install the operating systemResources LocationDell Systems Management Tools andDocumentation mediaDell.com/operatingsystemmanualsDell Lifecycle Controller Dell.com/idracmanualsDell OpenManage Deployment Toolkit Dell.com/openmanagemanualsDell certified VMware ESXi Dell.com/virtualizationsolutionsSupported operating systems on Dell PowerEdgesystemsDell.com/ossupportInstallation and How-to videos for supportedoperating systems on Dell PowerEdge systemsSupported Operating Systems for Dell PowerEdgeSystemsGUID-49D232C7-0B7A-4536-B5A0-1629CAACDA0FMethods to download firmware and driversYou can download the firmware and drivers by using any of the following methods:29
