hard drives in your system. The controller supports SAS and SATA hard drives and also enables you to setup the hard drives in RAID configurations. The RAID configurations depend on the version of the storagecontroller included with your system.GUID-F17370BA-4223-4E25-B65D-E15B1BE31B7FRemoving the integrated storage controller cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.3. Remove the cooling shroud.4. Remove the expansion card riser 1.5. Keep the Phillips #2 screwdriver ready.Steps1. Loosen the screws that secure the integrated storage controller cable to the integrated storagecontroller card connector on the system board.2. Lift the integrated storage controller cable away from the integrated storage controller.3. Lift one end of the card and angle it to disengage the card from the integrated storage controllercard holder on the system board.4. Lift the card out of the system.98
