GUID-59438B5D-182F-4C94-8866-83903AF71AC2Embedded system managementThe Dell Lifecycle Controller provides advanced embedded systems management throughout thesystem’s lifecycle. The Dell Lifecycle Controller can be started during the boot sequence and canfunction independently of the operating system.NOTE: Certain platform configurations may not support the full set of features provided by the DellLifecycle Controller.For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware,and deploying the operating system, see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.Related LinksDell Lifecycle ControllerGUID-D62AC4EB-E0AF-48F5-8F92-54F0371E005FBoot ManagerThe Boot Manager screen enables you to select boot options and diagnostic utilities.Related LinksBoot Manager main menuSystem BIOSViewing Boot ManagerGUID-9A03D297-C202-4104-9623-7DB4EB128468Viewing Boot ManagerTo enter Boot Manager:1. Turn on, or restart your system.2. Press F11 when you see the following message:F11 = Boot ManagerIf your operating system begins to load before you press F11, allow the system to complete thebooting, and then restart your system and try again.Related LinksBoot ManagerBoot Manager main menuGUID-4F3E3CE5-39AC-4CF6-B32D-A7671063B1D5Boot Manager main menuMenu item DescriptionContinue NormalBootThe system attempts to boot to devices starting with the first item in the bootorder. If the boot attempt fails, the system continues with the next item in the bootorder until the boot is successful or no more boot options are found.59
