Option DescriptionSystem Date Enables you to set the date on the system.Asset Tag Specifies the asset tag and enables you to modify it for security and trackingpurposes.KeyboardNumLockEnables you to set whether the system boots with the NumLock enabled ordisabled. This option is set to On by default.NOTE: This option does not apply to 84-key keyboards.F1/F2 Prompt onErrorEnables or disables the F1/F2 prompt on error. This option is set to Enabled bydefault. The F1/F2 prompt also includes keyboard errors.Load LegacyVideo OptionROMEnables you to determine whether the system BIOS loads the legacy video (INT10H) option ROM from the video controller. Selecting Enabled in the operatingsystem does not support UEFI video output standards. This field is available only forUEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot modeis enabled.In-SystemCharacterizationEnables or disables In-System Characterization. This option is set to Disabled bydefault. The two other options are Enabled and Enabled - No Reboot.NOTE: The default setting for In-System Characterization is subject to changein future BIOS releases.When enabled, In-System Characterization (ISC) executes during POST upondetecting relevant change(s) in system configuration to optimize system power andperformance. ISC takes about 20 seconds to execute, and system reset is neededfor ISC results to be applied. The Enabled - No Reboot option executes ISC andcontinues without applying ISC results until the next time system reset occurs. TheEnabled option executes ISC and forces an immediate system reset so that ISCresults can be applied. It takes the system longer to be ready due to the forcedsystem reset. When disabled, ISC does not execute.Related LinksMiscellaneous SettingsViewing Miscellaneous SettingsGUID-AC8A0FBD-0C5C-45F9-AA5E-5E49B24390D9iDRAC Settings utilityThe iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. Youcan enable or disable various iDRAC parameters by using the iDRAC settings utility.NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC EnterpriseLicense upgrade.For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guideat Dell.com/idracmanuals.Related LinksDevice SettingsSystem BIOSEntering the iDRAC Settings utilityChanging the thermal settings57
