GUID-30920CBE-7D41-4066-A84A-3A7BE117F4A8Installing the Trusted Platform ModulePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.CAUTION: Do not attempt to remove the Trusted Platform Module (TPM) from the system board.Once the TPM is installed, it is cryptographically bound to that specific system board. Anyattempt to remove an installed TPM breaks the cryptographic binding, and it cannot be re-installed or installed on another system board.1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.Steps1. Locate the TPM connector on the system board.NOTE: To locate the TPM connector on the system board, see the System board connectorssection.2. Align the edge connectors on the TPM with the slot on the TPM connector.3. Insert the TPM into the TPM connector such that the plastic rivet aligns with the slot on the systemboard.4. Press the plastic rivet until the rivet snaps into place.Figure 64. Installing the TPM1. rivet slot on the system board 2. plastic rivet3. TPM 4. TPM connectorNext steps1. Install the system board.2. Follow the procedure listed in the After working inside your system section.143
