additional pedestal mounts relative to a cutout should be in accordance with thetile manufacturer’s recommendations.l Take care when positioning the bays to make sure that a caster is not moved into acutout. Cutting tiles per specifications ensures the proper caster placement.l Use or create no more than one floor tile cutout that is no more than 8 in. (20 cm)wide by 6 in. (15 cm) deep in each 24 x 24 in. (61 x 61 cm) floor tile.l Ensure that the weight of any other objects in the data center does notcompromise the structural integrity of the raised floor or the subfloor (nonraisedfloor) of the data center.Physical space and weightThe following table provides the physical space, maximum weights, and clearance forservice.VMAX 250FTable 17 Space and weight requirements, VMAX 250FBayconfigurations aHeight(in/cm) bWidth(in/cm)Depthc(in/cm)Weight(max lbs/kg)1 system, 1 V-Brick 75/190 24/61 42 in (106.7 cm) 570/2581 system, 2 V-Bricks,or2 systems, 1 V-Brickeach75/190 24/61 42 in (106.7 cm) 850/3852 systems, 2 V-Bricks in one system,1 V-Brick in other75/190 24/61 42 in (106.7 cm) 1130/5132 systems, 2 V-Bricks each system75/190 24/61 42 in (106.7 cm) 1410/640a. Clearance for service/airflow is the front at 42 in (106.7 cm) front and the rear at 30 in(76.2 cm).b. An additional 18 in (45.7 cm) is recommended for ceiling/top clearance.c. Includes rear door.VMAX 450F, VMAX 850F, VMAX 950FTable 18 Space and weight requirements, VMAX 450F, VMAX 850F, VMAX 950FBayconfigurations aHeightb(in/cm)Widthc(in/cm)Depthd(in/cm)Weight(max lbs/kg)System bay 75/190 24/61 47/119 1860/844a. Clearance for service/airflow is the front at 42 in (106.7 cm) front and the rear at 30 in(76.2 cm).b. An additional 18 in (45.7 cm) is recommended for ceiling/top clearance.c. Measurement includes .25 in. (0.6 cm) gap between bays.d. Includes front and rear doors.Physical weight and spacePhysical space and weight 41
