Dell Networking N4000 Series Configuration Manual

Also see for N2000 Series: Reference guide Manual Firmware upgrade

Contents

Dell Networking N4000 Series Configuration Manual Manual pdf 1086 page image

1086 Configuring IP RoutingConfiguring Dell Networking Switch BTo configure Switch B:1 Enable routing on the switch.console#configureconsole(config)#ip routing2 Assign an IP address to VLAN 20. This command also enables IP routingon the VLAN.console#configureconsole(config)#interface vlan 20console(config-if-vlan20)#ip address 192.168.20.25255.255.255.0console(config-if-vlan20)#exit3 Assign an IP address to VLAN 30. This command also enables IP routingon the VLAN.console#configureconsole(config)#interface vlan 30console(config-if-vlan30)#ip address 192.168.30.30255.255.255.0console(config-if-vlan30)#exit4 Configure the VLAN 20 routing interface on Switch A as the defaultgateway so that any traffic with an unknown destination is sent toSwitch A for forwarding.console(config)#ip route default 192.168.20.20