100 Configuring System InformationSwitching Between Stack Masters1 Open the Stack Management page.2 Check the Switch Stack Control from Unit 1 to Unit 2 check box.3 Click Apply Changes.A confirmation message displays.4 Click OK.The device is reset. After the device is reset, a prompt for a user name and password displays.Managing Stacks Using the CLI CommandsThe following table summarizes the equivalent CLI commands for viewing fields displayed in the StackManagement page.Resetting the DeviceThe Reset page enables the device to be reset from a remote location. Save all changes to the StartupConfiguration file before resetting the device. This prevents the current device configuration from beinglost. For more information about saving Configuration files, see "Copy Files" on page 239. To open theReset page, click System → General → Reset in the tree view.Figure 6-9. ResetThe Reset page contains the following field:Reset Unit No. — Resets the selected stacking member.Table 6-7. Stack Management CLI CommandsCLI Command Descriptionstack reload Reloads stack members.stack master Forces the stack master selection
