Configuring System Information 123Displaying the Device Login History Using CLI CommandsThe following table summarizes the equivalent CLI commands for viewing and setting fields displayedin the Login History page.The following is an example of the CLI commands:Modifying Remote Log Server DefinitionsThe Remote Log Server Settings page contains fields for viewing and configuring the available LogServers. In addition, new log servers can be defined, and the log severity sent to each server.The event severity levels are listed on this page in descending order from the highest severity to the lowest.When a severity level is selected to appear in a log, all higher severity events are automatically selected toappear in the log. When a security level is not selected, no lower severity events appear in the log.For example, if Warning is selected, all severity levels higher and including Warning will appear in thelog. Additionally, no events with a lower security level than Warning will be listed.To open the Remote Log Server Settings page, click System → Logs → Remote Server Settings in thetree view.Table 6-17. Log File Table CLI CommandsCLI Command Descriptionshow users login-history Displays password management historyinformation.console# show users login-historyLogin Time Username Protocol Location----------- -------- -------- ----------01-Jan-200523:58:17Anna HTTP 172.16.1.801-Jan-200507:59:23Errol HTTP 172.16.0.801-Jan-200508:23:48Amy Serial01-Jan-200508:29:29Alan SSH 172.16.0.801-Jan-200508:42:31Bob HTTP 172.16.0.101-Jan-200508:49:52Cindy Telnet 172.16.1.7
