Configuring Switch Information 379The Voice VLAN Port Setting Table includes the Membership field which indicates if the Voice VLANmember is a static or dynamic member. The field value Dynamic indicates the VLAN membership wasdynamically created through GARP. The field value Static indicates the VLAN membership is user-defined.3 Select the unit number.4 Modify the fields as desired.5 Click Apply Changes.Defining Voice VLAN Port Settings Using CLI CommandsThe following table summarizes the equivalent CLI command for defining Voice VLAN port settings.Defining OUIsThe Voice VLAN OUI page lists the Organizationally Unique Identifiers (OUIs) associated with theVoice VLAN. The first three bytes of the MAC Address contain a manufacturer identifier. While the lastthree bytes contain a unique station ID. Using the OUI, network managers can add specificmanufacturer’s MAC addresses to the OUI table. Once the OUIs are added, all traffic received on theVoice VLAN ports from the specific IP phone with a listed OUI, is forwarded on the voice VLAN.To open the Voice VLAN OUI page, click Switch→ Voice VLAN → OUI in the tree view.Table 7-34. Voice VLAN Port Settings CLI CommandsCLI Command Descriptionvoice vlan secureno voice vlan secureUse the voice vlan secure interface configuration command to configure the secure modefor the voice VLAN. Use the no form of this command to disable the secure mode.
