40 Installing the PowerConnect 3524/P and PowerConnect 3548/P• Rack-mount kit for rack installation or wall mounting kit• Documentation CD• Product Information GuideUnpacking the DeviceNOTE: Before unpacking the device, inspect the package and immediately report any evidence of damage.1 Place the box on a clean flat surface.2 Open the box or remove the box top.3 Carefully remove the device from the box and place it on a secure and clean surface.4 Remove all packing material.5 Inspect the device and accessories for damage. Report any damage immediately.Mounting the DeviceThe following mounting instructions apply to The PowerConnect 3524/P and PowerConnect 3548/Pdevices. The Console port is on the back panel. The power connectors are positioned on the back panel.Connecting a Redundant Power Supply (RPS) is optional, but is recommended. The RPS connector ison the back panel of the devices.Installing in a RackWARNING: Read the Safety Information included in the Product Information Guide for safety information ondevices connected to or that support the SWI.WARNING: Disconnect all cables from the unit before mounting the device in a rack or cabinet.WARNING: When mounting multiple devices into a rack, mount the devices from the bottom up.
