Configuring System Information 205Managing Files Using CLI CommandsThe following table summarizes the equivalent CLI commands for managing system files.The following is an example of the CLI commands:Defining Advanced SettingsThe the Advanced Settings page contains a link for configuring general settings. Use Advanced Settings toset miscellaneous global attributes for the device. The changes to these attributes are applied only after thedevice is reset. To open the Advanced Settings page, click System → Advanced Settings in the tree view.Table 6-45. Copy Files CLI CommandsCLI Command Descriptiondir Display list of files on a flash file systemconsole# dirDirectory of flash:File Name Permis-sionFlashSizeDataSizeModified-------------- ------ ------ ------ --------------------3.txt rw 524288 523776 22-Feb-2005 18:49:27setup rw 524288 95 22-Feb-2005 15:58:19setup2 rw 524288 95 22-Feb-2005 15:58:35image-1 rw 4325376 4325376 06-Feb-2005 17:55:32image-2 rw 4325376 4325376 06-Feb-2005 17:55:31test.txt rw 524288 95 22-Feb-2005 12:16:44aaafile.prv -- 131072 -- 06-Feb-2005 19:09:02syslog1.sys r- 262144 -- 22-Feb-2005 18:49:27syslog2.sys r- 262144 -- 22-Feb-2005 18:49:27directory.prv -- 262144 -- 06-Feb-2005 17:55:31startup-config rw 524288 347 22-Feb-2005 11:56:03Total size of flash: 16646144 bytesFree size of flash: 4456448 bytes
