208 Configuring System InformationConfiguring iSCSI Global Parameters:1 Open the iSCSI Optimization Global Parameters page.2 Edit the relevant fields.3 Click Apply Changes.Defining iSCSI Global Parameters Using CLI CommandsThe following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSIGlobal Parameters page.Figure 6-95. iSCSI Global Parameters CLI CommandsCLI Command Descriptioniscsi enableno iscsi enableTo globally enable iSCSI awareness use the iscsi enable commandin global configuration mode. To disable iSCSI awareness use theno form of this command.iscsi cos {up vpt | dscpdscp} [remark] [bandwidthflow-bandwidth] [burstsizeflow-burstsize]no iscsi cosTo set the quality of service profile that will be applied to iSCSIflows use the iscsi cos command. To return to default, use the noform of this command.iscsi aging time timeno iscsi aging timeTo set aging time for iSCSI sessions use the iscsi aging timecommand in global configuration mode. To cancel aging, use theno form of this command.show iscsi To display the iSCSI settings, use the show iscsi privileged EXECcommand.
