Configuring Device Information 259speed bps Configures the speed of a given ethernetinterface when not using auto negotiation.autobaud Sets the line for automatic baud rate detection.negotiation Enables auto negotiation operation for thespeed and duplex parameters of a giveninterface.back-pressure Enables Back Pressure on a given interface.flowcontrol {auto | on| off | rx | tx}Configures the Flow Control on a giveninterface.show interfacesconfiguration[ethernet interface|port-channel port-channel-number]Displays the configuration for all configuredinterfaces.show interfaces status[ethernet interface|port-channel port-channel-number]Displays the status for all configuredinterfaces.show interfacesdescription [ethernetinterface |port-channel port-channel-number]Displays the description for all configuredinterfaces.show interfaces port-channel [port-channel-number]Displays Port-channel information (whichports are members of that port-channel, andwhether they are currently active or not).Table 7-13. LAG Configuration CLI Commands(continued)CLI Command Description
