306 Configuring Device InformationDefining VLAN LAG SettingsThe VLAN LAG Setting page provides parameters for managing LAGs that are part of a VLAN. VLANscan either be composed of individual ports or of LAGs. Untagged packets entering the device are taggedwith the LAGs ID specified by the PVID. To open the VLAN LAG Setting page, click Switch→ VLAN→LAG Settings in the tree view.Figure 7-44. VLAN LAG Setting• LAG — The LAG number included in the VLAN.• LAG VLAN Mode — The LAG VLAN mode. Possible values are:– General — The LAG belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full802.1Q mode).– Access — The LAG belongs to a single, untagged VLAN.– Trunk — The LAG belongs to VLANs in which all ports are tagged (except for an optional singlenative VLAN).• PVID — Assigns a VLAN ID to untagged packets. The possible field values are 1-4095. VLAN 4095 isdefined as per standard and industry practice, as the discard VLAN. Packets classified to this VLAN aredropped.• Frame Type — Packet type accepted by the LAG. Possible values are:– Admit Tag Only — Only tagged packets are accepted by the LAG.– Admit All — Tagged and untagged packets are both accepted by the LAG.
