50 Starting and Configuring the DeviceStartup ProceduresStartup Menu ProceduresThe procedures called from the Startup menu cover software download, flash handling and passwordrecovery. The diagnostics procedures are for use by technical support personnel only and are not disclosed inthe document.The Startup menu can be entered when booting the device – a user input must be entered immediately afterthe POST test.To enter the Startup menu:1 Turn the power on and watch for the auto-boot message.******************************************************************* SYSTEM RESET *******************************************************************------ Performing the Power-On Self Test (POST) ------UART Channel Loopback Test........................PASSTesting the System SDRAM..........................PASSBoot1 Checksum Test...............................PASSBoot2 Checksum Test...............................PASSFlash Image Validation Test.......................PASSBOOT Software Version 1.0.0.20 Built 22-Jan-xxxx 15:09:28Processor: FireFox 88E6218 ARM946E-S , 64 MByte SDRAM.I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.Preparing to decompress...
