Configuring Device Information 339Enabling IGMP Snooping on the Device1 Open the IGMP Snooping page.2 Select the VLAN ID for the device on which IGMP snooping needs to be enabled.3 Select Enable in the IGMP Snooping Status field.4 Complete the fields on the page.5 Click Apply Changes.IGMP snooping is enabled on the device.Displaying the IGMP Snooping Table1 Open the IGMP Snooping.2 Click Show All.The IGMP Snooping Table opens.Figure 7-60. IGMP Snooping TableConfiguring IGMP Snooping with CLI CommandsThe following table summarizes the equivalent CLI commands for configuring IGMP Snooping on thedevice:Table 7-42. IGMP Snooping CLI CommandsCLI Command Descriptionip igmp snooping Enables Internet Group Membership Protocol (IGMP) snooping.ip igmp snooping mrouter learn-pim-dvmrp Enables automatic learning of Multicast router ports in thecontext of a specific VLAN.ip igmp snooping host-time-out time-out Configures the host-time-out.ip igmp snooping mrouter-time-out time-out Configures the mrouter-time-out.ip igmp snooping leave-time-out {time-out |immediate-leave}Configures the leave-time-out.
