62 Using Dell OpenManage Switch AdministratorThe following example illustrates how to access Global Configuration Mode and return back to thePrivileged EXEC Mode:console#console#configureconsole(config)#exitconsole#Interface Configuration ModeInterface configuration commands modify specific IP interface settings, including bridge-group, description,etc.VLAN Database ModeThe VLAN mode contains commands to create and configure a VLAN as a whole, for example, to create aVLAN and apply an IP address to the VLAN. The following is an example of the VLAN mode prompt:Console # vlan databaseConsole (config-vlan)#Port Channel ModeThe Port Channel mode contains commands for configuring Link Aggregation Groups (LAG). Thefollowing is an example of the Port Channel mode prompt:Console (config)# interface port-channel 1Console (config-if)#Interface ModeThe Interface mode contains commands that configure the interface. The Global Configuration modecommand interface ethernet is used to enter the interface configuration mode. The following is anexample of the Interface mode prompt:console> enableconsole# configureconsole(config)# interface ethernet g18console(config-if)#Management Access ListThe Management Access List mode contains commands to define management access-lists. The GlobalConfiguration mode command management access-list is used to enter the Management AccessList Configuration mode.
