Configuring System Information 129Defining IPv6 Neighbors Using CLI CommandsThe following table summarizes the equivalent CLI commands for setting fields displayed in the IPv6Neighbors page.The following is an example of the CLI commands:Viewing the IPv6 Routes TableThe IPv6 Routes Table stores information about IPv6 destination prefixes and how they are reached,either directly or indirectly. The routing table is used to determine the next-hop address and the interfaceused for forwarding.Each dynamic entry also has an associated invalidation timer value (extracted from RouterAdvertisements) used to delete entries that are no longer advertised.To open the IPv6 Routes Table page, click System→ IP Addressing→ IPv6 Routes Table in the tree view.Table 6-22. IPv6 Neighbors Parameters CLI CommandsCLI Command Descriptionipv6 neighbor ipv6_addrhw_addr {ethernet interface-number | vlan vlan-id | port-channel number }Configures a static entry in the IPv6 neighbordiscovery cache.show ipv6 neighbors {static |dynamic}[ipv6-address ipv6-address] [mac-address mac-address] [ethernet interface-number | vlan vlan-id | port-channel number ]Displays IPv6 neighbor discovery cacheinformation.clear ipv6 neighbors Deletes all entries in the IPv6 neighbor discoverycache.Console# show ipv6 neighbors dynamicInterface IPv6 address HW address State--------- ------------ ---------- -----VLAN 1 2031:0:130F::010:B504:DBB4 00:10:B5:04:DB:4B REACHVLAN 1 2031:0:130F::050:2200:2AA4 00:50:22:00:2A:A4 REACH
