64 Using Dell OpenManage Switch AdministratorPrivileged EXEC ModePrivileged access can be protected to prevent unauthorized access and ensure operating parameters.Passwords are displayed in the ***** format on the screen, and are case sensitive.To access and list the Privileged EXEC Mode commands:1 At the prompt type enable and press .2 When a password prompt displays, enter the password and press .The Privileged EXEC mode prompt displays as the device host name followed by #. For example:console#To list the Privileged EXEC commands, type a question mark at the command prompt and press.To return from Privileged EXEC Mode to User EXEC Mode use any of the following commands:disable, exit/end, or .The following example illustrates accessing privileged EXEC mode and then returning to the UserEXEC mode:console>enableEnter Password: ******console#console#disableconsole>Use the exit command to move back to a previous mode. For example, from Interface Configurationmode to Global Configuration mode, and from Global Configuration mode to Privileged EXEC mode.Global Configuration ModeGlobal Configuration commands apply to system features, rather than a specific protocol or interface.To access Global Configuration mode, at the Privileged EXEC Mode prompt, type configure andpress . The Global Configuration Mode displays as the device host name followed by (config)and the pound sign #.console(config)#To list the Global Configuration commands, enter a question mark at the command prompt.To return from Global Configuration mode to Privileged EXEC mode, type the exit command or usethe command.
