Configuring System Information 147The following is an example of the CLI command:Managing Device SecurityThe Management Security page provides access to security pages that contain fields for setting securityparameters for ports, device management methods, user, and server security. To open the ManagementSecurity page, click System→Management Security in the tree view.Defining Access ProfilesThe Access Profiles page contains fields for defining profiles and rules for accessing the device. Access tomanagement functions can be limited to user groups, which are defined by ingress interfaces and sourceIP address and/or source IP subnets.Management access can be separately defined for each type of management access method, including,Web (HTTP), Secure web (HTTPS), Telnet, Secure Telnet and SNMP.Access to different management methods may differ between user groups. For example, User Group 1can access the device only via an HTTPS session, while User Group 2 can access the device via bothHTTPS and Telnet sessions.console> enableConsole# show fiber-ports optical-transceiverPowerPort Temp(C)Voltage(Volt)Current(mA)Output(mWatt)Input(mWatt)TXFaultLOS21 W OK OK OK OK OK OK22 OK OK OK OK OK E OK23 CopperTemp – Internally measured transceiver temperature.Voltage - Internally measured supply voltage.Current – Measured TX bias current.Output Power – Measured TX output power.Input Power – Measured RX received power.Tx Fault – Transmitter faultLOS – Loss of signal
