60 Using Dell OpenManage Switch AdministratorTable 5-1 lists the interface components with their corresponding numbers.Device RepresentationThe PowerConnect home page contains a graphical device representation of the front panel.Figure 5-2. Port LED IndicatorsThe port coloring indicates if a specific port is currently active. Ports can be the following colors:Table 5-2. Led IndicatorsNOTE: The Port LEDs are not reflected in PowerConnect front panel in the PowerConnect OpenManage SwitchAdministrator. LED status can only be determined by viewing the actual device. For more information about LEDs,see "LED Definitions" on page 27.Table 5-1. Interface ComponentsComponent Name1 The tree view contains a list of the different device features. The branches inthe tree view can be expanded to view all the components under a specificfeature, or retracted to hide the feature's components. By dragging thevertical bar to the right, the tree area can be expanded to display the full nameof a component.2 The device view provides information about device ports, currentconfiguration and status, table information, and feature components.Depending on the option selected, the area at the bottom of the device viewdisplays other device information and/or dialogs for configuring parameters.3 The components list contains a list of the feature components. Componentscan also be viewed by expanding a feature in the tree view.4 The information buttons provide access to information about the device andaccess to Dell Support. For more information, see "Information Buttons."Component NamePort IndicatorsGreen The port is currently enabled.Red An error has occurred on the port.Blue The port is currently disabled.
