Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.Advarsel Bruk aldri en rampe som heller mer enn 10 grader.Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.¡Atención! No usar una rampa inclinada más de 10 gradosVarning! Använd inte ramp med en lutning på mer än 10 grader.RelatedDocumentationGeneral Safety Guidelines and Warnings for J-EX Series Switches on page 201•• Laser and LED Safety Guidelines and Warnings for J-EX Series Switches on page 207• Installation Instructions Warning for J-EX Series Switches on page 213• Grounded Equipment Warning for J-EX Series Switches on page 219Rack-Mounting and Cabinet-Mounting Warnings for J-EX Series SwitchesEnsure that the rack or cabinet in which the J-EX Series switch is installed is evenly andsecurely supported. Uneven mechanical loading could lead to a hazardous condition.WARNING: To prevent bodily injury when mounting or servicing the switchin a rack, take the following precautions to ensure that the system remainsstable. The following directives help maintain your safety:• The switch must be installed in a rack that is secured to the buildingstructure.• The switch should be mounted at the bottom of the rack if it is the onlyunit in the rack.• When mounting the switch on a partially filled rack, load the rack from thebottom to the top with the heaviest component at the bottom of the rack.• If the rack is provided with stabilizing devices, install the stabilizers beforemounting or servicing the switch in the rack.WARNING: Waarschuwing Om lichamelijk letsel te voorkomen wanneer udit toestel in een rek monteert of het daar een servicebeurt geeft, moet uspeciale voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestelstabiel blijft. De onderstaande richtlijnen worden verstrekt om uw veiligheidte verzekeren:215Chapter 18: Installation and Maintenance Safety Information
