Disabling T10 PITo disable T10 PI:1. Press .The list of available actions is displayed.2. Click Disable Data Protection.Secure Firmware UpdateThis feature provides a cryptographic method of updating the firmware using RSA encryption-decryptionalgorithm.Only Dell certified firmware is supported on your PERC controller.Improved RAID 10 ConfigurationRAID 10 configuration has been simplified for easier management and deployment. Disks are selected inmirrored pairs, and the user is no longer required to select the number of disks per span.NOTE: An even number of drives is required to create RAID 10 virtual disks.4KB Block Size Disk DrivesPERC H730P card supports 4KB block size disk drives, which enables you to efficiently use the storagespace.NOTE: Mixing 512–byte native and 512–byte emulated drives in a virtual disk is allowed. But, mixing512–byte and 4KB native block size drives in a virtual disk is not allowed.Physical Disk Power ManagementPhysical disk power management is a power-saving feature of the PERC H730P card. The feature allowsdisks to be spun down based on disk configuration and I/O activity. The feature is supported on allrotating SAS and SATA disks and includes unconfigured, configured, and hot-spare disks. The physicaldisk power management feature is disabled by default. The feature can be enabled in the Dell OpenManage Storage Management application or Unified Extensible Firmware Interface (UEFI) RAIDConfiguration utility. For more information, see the Dell OpenManage documentation at dell.com/support/manuals.There are four power-saving modes:No PowerSavings(default mode)All power savings features are disabled.BalancedPower SavingsSpin down is enabled only for unconfigured and hot spare disks.16