Secured = YesLocked = NoNeeds EKM Attention = NoPI Eligible = YesDrive is formatted for PI = YesPI type = 2Number of bytes of user data in LBA = 4 KBCertified = YesWide Port Capable = NoPort Information :================--------------------------------------------Port Status Linkspeed SAS address--------------------------------------------0 Active 6.0Gb/s 0x5000c5006b1a4fba1 Active 6.0Gb/s 0x0--------------------------------------------Inquiry Data =00 00 06 12 8b 01 30 02 53 45 41 47 41 54 45 2053 54 36 30 30 4d 50 30 30 38 34 20 20 20 20 2056 42 34 34 53 32 47 30 31 48 35 54 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 43 6f 70 79 72 69 67 68 74 20 28 63 29 20 3230 31 33 20 53 65 61 67 61 74 65 20 41 6c 6c 20Displaying Boot Drive For The ControllerSyntaxperccli /c0 show bootdriveDescriptionDisplays the boot drive for the controller. The boot drive can be a physical drive or a virtual drive.ResultController = 0Status = SuccessDescription = NoneController Properties :=====================-----------------Ctrl_Prop Value-----------------BootDrive VD:13-----------------Setting Virtual Drive As Boot DriveSyntaxperccli /c0/v13 set bootdrive = on95