permanently discarded. Press 'X' to acknowledge and permanentlydestroy the cached data.ProbableCause:The controller preserves the dirty cache from a virtual disk if the disk becomesoffline or is deleted because of missing physical disks. This message indicates thatsome configured disks were removed. If the disks were not removed, they are nolonger accessible. The SAS cables for your system might be improperly connected.CorrectiveAction:Check the cable connections and fix any problems. Restart the system. Use the utility to import the virtual disk or discard the preserved cache. For thesteps to manage preserved cache, see Managing The Preserved Cache .BIOS Disabled Error MessageError Message: BIOS Disabled. No Logical Drives Handled by BIOS.ProbableCause:This warning message is displayed after you disable the ROM option in theconfiguration utility. When the ROM option is disabled, the BIOS cannot boot to Int13h and cannot provide the ability to boot from the virtual disk. Int 13h is aninterrupt signal that supports numerous commands that are sent to the BIOS andthen passed to the physical disk. The commands include actions you can performwith a physical disk, such as reading, writing, and formatting.CorrectiveAction:Enable the ROM option.Drive Configuration Changes Error MessageError Message: Entering the configuration utility in this state will result indrive configuration changes. Press 'Y' to continue loading theconfiguration utility or please power off your system and checkyour cables to ensure all disks are present and reboot.ProbableCause:The message is displayed after another BIOS warning indicating there are problemswith previously configured disks and you have chosen to accept any changes andcontinue. The SAS cables for your system might be improperly connected.CorrectiveAction:Check the cable connections and fix any problems before restarting the system. Ifthere are no cable problems, press any key or to continue.Adapter At Baseport Not Responding Error MessageError Message: Adapter at Baseport xxxx is not responding, where xxxx is thebaseport of the controller.CorrectiveAction:Contact Dell Technical Support.73
