Dell PowerEdge M1000e Reference Manual

Also see for PowerEdge M1000e: Manual Command reference guide Owner's manual Update Getting started guide

Contents

Dell PowerEdge M1000e Reference Manual Manual pdf 133 page image

Exampleracadm getconfig -g cfgCurrentIPv6LanNetworking# cfgCurrentIPv6Enabled=1# cfgCurrentIPv6AutoConfigWasUsed=1# cfgCurrentLinkLocalAddress=fe80::21e:4fff:fe1f:5371/64# cfgCurrentIPv6Address1=2009:123::e48f:9dd8:6f51:a669/64# cfgCurrentIPv6Address2=fd88:1::21e:4fff:fe1f:5371/64# cfgCurrentIPv6Address3=fd88:2::21e:4fff:fe1f:5371/64# cfgCurrentIPv6Gateway=fe80::21c:23ff:fe77:6215# cfgCurrentIPv6DNSServersFromDHCP6=1# cfgCurrentIPv6DNSServer1=2009:123::1# cfgCurrentIPv6DNSServer2=::cfgNetTuningThis group enables users to configure the advanced network interface parameters. When configured, the updated settings may takeup to a minute to become active.CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modification of the properties inthis group can result in your RAC NIC become inoperable.The following sections provide information about the objects in the cfgNetTuning group.cfgNetTuningNicSpeed (Read or Write)Description Specifies the speed for the CMC NIC. This property is used only if cfgNetTuningNicAutoNeg is set to 0.Legal Values 10, 100, or 1000Default 100cfgNetTuningNicAutoneg (Read or Write)Description Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over othervalues set in this group.Legal Values • 0 = Auto Negotiation is Disabled• 1 = Auto Negotiation is EnabledDefault 1Exampleracadm getconfig -g cfgNetTuningcfgNetTuningNicSpeed=100cfgNetTuningNicFullDuplex=1cfgNetTuningNicMtu=1500cfgNetTuningNicAutoneg=1cfgNetTuningNicFullDuplex (Read or Write)Description Specifies the duplex setting for the NIC. This property is used only if thecfgNetTuningNicAutoNeg is setto 0 (disabled).Legal Values • 0 (Half Duplex)133

/ 135

Related manuals for Dell PowerEdge M1000e