Dell PowerEdge M1000e Reference Manual

Also see for PowerEdge M1000e: Manual Command reference guide Owner's manual Update Getting started guide

Contents

Dell PowerEdge M1000e Reference Manual Manual pdf 70 page image

• -l — Sets the local date and time in the string YYYYMMDDhhmmss where:– YYYY is the year– MM is the month– DD is the day– hh is the hour– mm is the minute– ss is the secondSetting the time using the -l and -z options are recommended. This command format allows the CMC tosupport local time zones. This command includes the ability to automatically adjust the CMC time to thelocal Daylight Savings Time (DST).Example The setractime subcommand supports dates ranging from 1/1/1970 00:00:00 through 12/31/203023:59:59.• To set the local time to November 24, 2012 at 3:02:30 pmracadm setractime -l 20121124150230The time was set successfully• Set the timezone to 'US/Pacific':racadm setractime -z US/Pacific• List all 'US' time zones:racadm setractime -z US*setslotnameDescription Displays the name and hostname (if available) of all the 16 slots, or of a specified slot (indicated by the slotnumber) in the chassis. Optionally, this command can be used to set whether the slot name or hostname isdisplayed in the CMC User Interface or with the getslotname -i command. If the hostnameis not available, the static slot name is used.To run this subcommand, you must have the Administrator privilege.NOTE:• The special characters “ (double quotation mark), ‘ (backward quotation mark), & (ampersand), ,(comma), and \ (backward slash) are not supported for this subcommand.• The OMSA server agent must be present and running on the server to use the Display Hostnamefeature. If the agent is not running, the setting is ignored. For more information, see the DellOpenManage Server Administrator User's Guide at support.dell.com/manuals.Synopsis • racadm setslotname -i • racadm setslotname -h Input • —i — Displays the location of the slot in the chassis.Legal values: 1–16• — The new name assigned to the slot.• —h — Sets whether the server's hostname is used for display purposes.Legal values: 0, 1Example • Set slot name for slot 3 to server3:racadm setslotname -i 3 server3The slot name was set successfully.• Enable System to Display Hostnames (1 = Active):racadm setslotname -h 170