racadm ? and ? subcommandDescription Displays all the subcommands you can use with the RACADM command and a one-line description about eachsubcommand.? followed by displays the syntax for the specified command.To use this subcommand, you must have the CMC Login User privilege.You can also use the help and help commands to obtain the same information.Synopsis racadm ?racadm ? Input N/AOutput N/AExample for RACADM?The following output example shows only part of the actual output for the RACADM? command. Descriptions shown in this examplemay vary slightly from the descriptions in your RACADM session.racadm ?help -- list racadm subcommand descriptionhelp -- display usage summary for a subcommand? -- list racadm subcommand description? -- display usage summary for a subcommandarp -- display the networking arp tablechassisaction -- execute chassis or switch power-up/down/cycle or KVM powercyclechassislog -- display chassis log management operationsclosessn -- close a sessionclrraclog -- clear the CMC logclrsel -- clear the System Event Log (SEL)cmcchangeover -- changes the redundant state of the CMC from active to standby and viceversaconfig -- modify CMC configuration propertiesconnect -- connect to switch or blade serial consoledeploy -- deploy blade or IOM by specifying required propertiesfeature -- display features active on the chassis / feature deactivationfeaturecard -- feature card status and list the available featuresfwupdate -- update the firmware on a CMC, server, IOM inf, or KVMgetactiveerrors -- display CMC active errorsgetassettag -- display asset taggetchassisname -- get the chassisnamegetconfig -- display CMC configuration propertiesgetdcinfo -- display general I/O module and DC configuration informationgetfanreqinfo -- display fan request information for Servers and Switchesgetflexaddr -- display Flexaddress enablement status for all slots and fabricsgetioinfo -- display general IO information and stack informationgetkvminfo -- display the KVM module informationgetled -- display the LED settings on a modulegetmacaddress -- get MAC/WWN addressesgetmodinfo -- get module configuration and status informationgetniccfg -- display network settings for modulesgetpbinfo -- get power budget status informationgetpminfo -- get power management status informationgetraclog -- display the CMC loggetractime -- display the current CMC timegetredundancymode -- gets the redundancy mode of the CMCgetsel -- display records from the System Event Log (SEL)getsensorinfo -- display system sensorsgetslotname -- gets the name of the slot in the chassis14
