server-5 Not Present None Noneserver-6 Not Present None Noneserver-7 Not Present None Noneserver-8 Present LPe1105-M4 Noneserver-9 Extension(1) None Noneserver-10 Not Present None Noneserver-11 Not Present None Noneserver-12 Not Present None Noneserver-13 Not Present None Noneserver-14 Not Present None Noneserver-15 Not Present None Noneserver-16 Not Present None NonegetflexaddrDescription Displays enabled or disabled status for the entire chassis and fabric ID decoder. If used with the -i option, thecommand displays MACs/WWN addresses on a per slot basis.The decoder values indicate the protocols of the network cards:• 0 — Unsupported• 1 — ISCSI• 2 — FCoE-FIP• 3 — iSCSI/FCoE-FIPTo run this subcommand, you must have the CMC Login User privilege.NOTE: If FlexAddress is not activated on the chassis, the command displays server-assignedMAC/WWN addresses. If the slot is empty, the command enters blank in the server-assignedMAC/WWN addresses. If an external console controls the MAC/WWN addresses, the commanddisplays an externally managed message.Synopsis racadm getflexaddr [-i ]Input -i — Specifies the slot information that must be displayed. can be from 1 to 16.Output NoneExampleDisplay current flexaddress settings for all slots and fabrics.racadm getflexaddr<Slot#> <Status> <Server Presence>1 Enabled Present2 Enabled Present33
