krbkeytabuploadDescription Uploads a Kerberos keytab file to CMC.To run this subcommand, you must have the Configure Chassis Administrator privilege.NOTE: This subcommand is only supported on the remote interface(s).Synopsis racadm krbkeytabupload [-f ] is the name of the file including the path.Input -f — Specifies the filename of the keytab uploaded. If the file is not specified, the keytab file in the currentdirectory is selected.Example Upload a kerberos keytab file from the local filesystem:racadm krbkeytabupload -f c:\keytab\krbkeytab.tabnetstatDescription Displays the routing table and the current connections.To run this subcommand, you must have the Execute Diagnostic Commands permission.Synopsis racadm netstatInput N/AOutputKernel IPv6 routing tableDestination Next Hop Flags Metric Ref Use Iface::1/128 :: U 0 30 1 lofe80::200:ff:fe00:d01/128:: U 0 0 1 lofe80::/64 :: U 256 0 0 ethlff00::/8 :: U 256 0 0 ethlKernel IP routing tableDestination Gateway Genmask Flags MSS Window irtt Iface192.168.0.310.0.0.0 255.255.255.0U 0 0 0 bond00.0.0.0 192.168.0.320.0.0.0 UG 0 0 0 bond0Active Internet connections (w/o servers)Proto Recv-Q Send-Q Local Address Foreign Address Statetcp 0 0 127.0.0.1:8195 127.0.0.1:52887 ESTABLISHEDtcp 0 0 127.0.0.1:52175 127.0.0.1:199 ESTABLISHED58