Related linkSafety instructionsBefore working inside your systemAfter working inside your systemRemoving the cooling shroudRemoving the optional expansion card riserInstalling the optional expansion card riserInstalling the cooling shroudSD vFlash card (optional)An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides persistent on-demand local storage and a custom deployment environment that enables automation of server configuration, scripts, and imaging. Itemulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.Removing the optional SD vFlash cardPrerequisites1 Follow the safety guidelines listed in the Safety instructions section.2 Locate the SD vFlash card slot at the back of the chassis.StepTo remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlash card from the SD vFlash card slot.Figure 49. Removing the optional SD vFlash card1 SD vFlash card 2 SD vFlash card slotInternal dual SD module (optional)The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features:• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, theinformation is replicated from one SD card to another.• Single card operation — single card operation is supported, but without redundancy.Installing and removing system components 109
